Water Heater Repair Orchards, WA Schedule Now
Pilot Plumbing & Drain Vancouver | Serving Portland, Battle Ground WA Area
Plumber-Tips--Why-Do-I-Have-Low-Water-Pressure-At-Home--_-Vancouver,-WA
Photo By yatigra at istock

Plumber Tips: Why Do I Have Low Water Pressure At Home? | Vancouver, WA

It can be stressful to have low water pressure at home. But sometimes, you have low water pressure because there might be some problems on the water supplier’s end. You may want to ask around some of your neighbors first and check whether they are experiencing the same issue. If they’re not having the same problem, consider our tips below. If you need more assistance, don’t hesitate to contact a plumber in Vancouver, WA.

Check the Main Shut-Off Valve

As a homeowner, ensure that you know where this is located. It’s usually found close to where the main water pipes are located. You need to make sure that the shut-off valve is open all the way. When the handle isn’t parallel to the pipe, it can limit water flow to your home. If you need additional help, don’t hesitate to contact a plumber in Vancouver, WA.

It’s essential to know the location of the shut-off valves as you need to switch them off in the event of a plumbing emergency such as burst pipes and other leaks in your plumbing. Before calling a plumber, switch it off first to avoid further water damage.

Clogged Aerator

When the shut-off valves are open all the way yet you still have low water pressure at home, try to check your faucet’s aerator. Do this only when the low pressure is limited to just one tap in your home. If you don’t know what an aerator is — it’s that tiny screen on the faucet’s end. Over time, they can become clogged or rusted by debris. To remove, you need to unscrew the screen from the faucet and clean it properly. Reattach it after cleaning. If you don’t know how to do this, it’s best to call a professional in your area. Our plumbers at Pilot Plumbing can help with any plumbing repairs or replacements. Call us anytime, and we’ll quickly dispatch a licensed professional to your home or business.

Water Softener

A water softener that’s not working efficiently can cause a sudden decrease in your water pressure. This is why it’s essential for homeowners to properly maintain their water softener to prolong its lifespan and avoid other plumbing issues down the road. Always call a professional to help you service your water softener. Don’t worry; our plumbers at Pilot Plumbing are experienced and skilled with any water softener installation or repair.

Tips for maintaining the water softener:

  1. Regularly check the salt and refill it every two months or when necessary. You will need to replace it when the salt is dry and the water level is low. Do this frequently if your water softener is more than ten years old. Also, always use good salt for replacement. As much as possible, go with evaporated salt pellets or contact a plumbing company for advice.
  2. Clean your water softener brine tank regularly and know how to spot any trouble. Then, call for a plumber right away if you suspect that there might be a problem with the water softener. Otherwise, your water pressure may suffer.
  3. Watch out for those layers of crust that build up in the tank, as it can affect the efficiency of your water softener. Check for it regularly and make sure you remove the buildup to avoid other issues.

Mineral Buildup

Sediment buildup in the pipes can cause a reduction of the water pressure in your home. However, you can remedy this only when you call a professional in your area for a thorough inspection of your plumbing system. Our plumbers will use specialized tools to help us properly inspect your pipes and rule out any problem. Then, we can either repair it or replace them entirely with new pipes to improve the water pressure in your home.

Apart from the corroded pipes, a leaky pipe can also contribute to the reduced water pressure in your home. Call for a professional leak detection service to help you repair leaky pipes. As a homeowner, make sure that you also ensure that your plumbing is in top shape. Insulating the pipes during winter, flushing mineral buildup in the water heater tank, and periodically checking your plumbing are some of the things you can do to avoid major plumbing emergencies.

Faulty Pressure Regulator

The pressure regulator helps you regulate the water pressure in your home. But if they’re faulty, they can also be the culprit for low water pressure. So contact a licensed professional to inspect the regulator and safely fix it for you.

Sediment Build Up in the Water Heater

As we mentioned, routine maintenance of your water heater is essential as a faulty water heater affects the water pressure in your home. Once a year, make it a point to flush the sediment buildup. You need to also schedule regular plumbing inspections so a professional can do a proper inspection of your appliance and help you resolve any issues that may come up.

Contact Pilot Plumbing Today!

Are you having problems with the water pressure in your home? Call Pilot Plumbing & Drain as soon as possible. Our plumbers in Vancouver, WA, are licensed and experienced and tackle any plumbing job. Let us know if you’re having any issues, and we’ll quickly dispatch our skilled plumbers to your home or business. You can always rely on us for any plumbing problem because we’ll make sure that you are wholly delighted with the service we provide. Pilot Plumbing offers a wide range of plumbing services, including water heater repair, water softener, drain cleaning, leak detection, and much more. Call us today for an appointment.

360-614-2770 360-900-1211